You are here: Home > Bogen > Bogen Paging Accessories
Bogen Paging Accessories
Sort By:
Page of 1
Bogen NR-100 Night Ringer with Music input
Bogen NR-100 Night Ringer with Music input
List Price: $182.99
Our Price: $148.99

The NR100 connects to an amplifier via the auxiliary input and provides an electronic ring tone throughout the sound system when activated by 90V ring signal or contact closure. It automatically mutes any background music during use. The NR100 eliminates the need for external bells and alerts security or other personnel to incoming calls during non-business hours. Dimensions: 5-¼” x 1-3/16” x 3-¼”. Shipping weight 1 lb. Requires 24V power supply; Model RF24A recommended.
Bogen DFT-120 Digital Paging Feedback Terminator
Bogen DFT-120 Digital Paging Feedback Terminator
List Price: $1,389.99
Our Price: $1,089.99

The DFT120 Digital Feedback Terminator provides high-quality recording and playback of audio pages. It breaks the acoustical feedback loop created by the telephone handset and paging speaker. The page is first recorded and then played back as soon as the source handset has been put on-hook. Its record during playback and page stacking capabilities allow high-capacity paging - up to 8 pages during playback. Max. length of any page is 30 seconds. 2 minutes total audio memory. User selectable loop start trunk or 4-wire dry loop input interface and selectable 8-ohm or 600-ohm output impedances allow direct connection to a wide range of external equipment. Features pre-page tone, message repeat, adjustable delay, plugable terminal strip. Detects, regenerates, and strips out DTMF tones in messages. Wall mounting. Automatic or manual operation. Can be used with zone page module for zone paging applications. Dimensions: 10" W x 1.5" H x 6.5" D. Shipping weight: 6 lbs. A 12V DC power supply included.
Bogen RM-350D AM/FM Receiver with PLL Circuitry (35 Watt Amplifier)
Bogen RM-350D AM/FM Receiver with PLL Circuitry (35 Watt Amplifier)
List Price: $589.99
Our Price: $449.99

The Bogen RM350D AM/FM Receiver combines the PLL circuitry of the TP30D receiver with a versatile 35 watt single channel amplifier providing all the power and paging a small system needs. It includes a microphone and aux input and paging circuitry Targeted applications include professional offices, hotel/motel lobbies, restaurants, small hospitals and clinics, garage/service centers, retail stores and transportation centers; anywhere that it is desirable to create a congenial atmosphere and necessary to address groups.The RM-350D features a low-impedance microphone input with mic precedence and pushbutton paging for up to 4 different areas. A single button press makes an all-call page. The receiver supplies two-way music muting, either through contact closure or vox activation. The receiver has a large, easy to read LCD display panel, pushbutton tuning and 18 FM presets and 12 AM presets. Independent controls are provided for bass, treble, volume and microphone gain. A variable music mute level control is provided for the aux input.The receiver can provide music for from one to one hundred loudspeakers, provided that the total power consumed does not exceed 35 watts. A tape out jack is provided for taping the receivers output. Rear panel screw terminals are provided for 4, 8, and 16 W and 25V and 70V systems. External antenna connections are also provided. Rack mount using the RPK47 kit.
Bogen TAM-B - Telephone System / Paging System Interface
Bogen TAM-B - Telephone System / Paging System Interface
List Price: $249.99
Our Price: $219.99

The TAMB interfaces a telephone system with a paging system. Station port or trunk port operation. Features calling-party-controlled disconnect and volume-adjustable preannounce or confirmation tones. Includes background music input jack and volume control. Complies with Part 68 of FCC Rules. Dimensions: 8-1/8” x 1-1/8” x 4-½”. Shipping weight: 2 lbs. Power requirements are: Station port mode — none; Trunk port mode — 24VDC @ 90mA or 48VDC @ 105mA; Model PRS48 power supply recommended.
Bogen TG-4C Tone Generator - Pulsed Tone, Slow Whoop, Chime or Steady Tone
Bogen TG-4C Tone Generator - Pulsed Tone, Slow Whoop, Chime or Steady Tone
List Price: $249.99
Our Price: $199.99

The TG4C can generate pulsed tone, slow whoop, repeating chime or steady tone. The signal may be applied continuously or limited to a double-burst. It is an excellent choice for alarm or preannounce signals in public address and telephone paging systems.Triggered by external contact closure. Output is 1 volt RMS into 600 W, and is adjustable. Accepts program source input with tone precedence. Dimensions are 6-¾” x 2” x 5-¾”. Shipping weight: 3 lbs. Requires 12 - 48V power supply; Model PRS40C recommended.
Bogen ZPM-3 Telephone-Compatible Zone Paging Module w/ All-Call & Talkback
Bogen ZPM-3 Telephone-Compatible Zone Paging Module w/ All-Call & Talkback
List Price: $424.99
Our Price: $289.99

Bogen TP-30D Digital Tuner with Digital PLL Tuning
Bogen TP-30D Digital Tuner with Digital PLL Tuning
List Price: $289.99
Our Price: $249.99

The new TP30D digital tuner utilize digital PLL tuning to provide FM and AM mono or stereo reception to medium to large background music systems. It is manufactured using solid-state circuitry for dependable, continuous operation. Bogen tuners are the choice for precise tuning and superior signal quality.A large, easy to read LCD display panel and three-way pushbutton tuning make frequency selection simple. Three-way pushbutton tuning lets you scan the frequency scale to select a frequency. 18 presets for FM and 12 presets for AM can be programmed and selected with a touch of a button. Presets can also be scanned with a single button in order to quickly review programming and make a selection.Mono and stereo outputs are provided. Connections are provided for an external 300 W or 75 W antenna. The tuner is extremely compact and can be rack mounted using accessory brackets. The tuner operates from 120V AC power and has a black anodized finish. Rack mount using the RPK46A kit.