You are here: Home > Bogen > Bogen Digitally Matrixed Amplifiers & Pre-Amps
Bogen Digitally Matrixed Amplifiers & Pre-Amps
Sort By:
Page of 1
Bogen PM3000 ProMatrix Digitally Matrixed Pre-Amplifier
Bogen PM3000 ProMatrix Digitally Matrixed Pre-Amplifier
List Price: $1,499.99
Our Price: $1,189.99

The same as PM3180 without amplification. Ability to connect to a user supplied amplifier.

Bogen’s ProMatrix Digitally Matrixed Pre-Amplifier, Model PM3000, is the ideal solution for restaurant, lounge/bar, hotel, factory or similar facilities where multiple audio sources and voice paging inputs need to be distributed to separate areas and automatically switched based on input priorities. The PM3000 provides up to 4 unbalanced aux inputs and 2 mic inputs that can be individually assigned to each of 3 output channels (one of the mic inputs can be programmed for telephone paging applications). Each input can be assigned a particular priority level for each output channel; the PM3000 will then automatically switch inputs based on input activity. Microphones can be assigned to priority level 1 or 2 and aux sources to levels 3, 4, 5, or 6. For example, a paging microphone can be assigned priority level 1, a jukebox to level 3 and a tuner to level 4. In this configuration, the tuner will play until the jukebox becomes active; when the page microphone is activated, it will override both of the other inputs. With tremendous flexibility for audio control and distribution in a single unit, the PM3000 is the preferred solution for multi-zone, multi-input sound management.

Bogen PM3180 ProMatrix Digitally Matrixed Amplifier
Bogen PM3180 ProMatrix Digitally Matrixed Amplifier
List Price: $1,894.99
Our Price: $1,699.99

Multi-zone, multi-priority installations simplified!
The new ProMatrix™ Digitally Matrixed Amplifier is the first of its kind to incorporate three independent amplifier channels with a unique digital interface. The PM3180 can accommodate up to 4 aux inputs and 2 mic inputs. Each input can be individually assigned to each amplifier channel. Each input on a particular channel can also be assigned a priority level. The amp channel will then automatically switch inputs based on input activity and priority level. Microphones can be assigned to priority level 1 or 2 and aux sources to levels 3, 4, 5, or 6. One of the mic inputs can be programmed for telephone paging applications.  The three amplifier channels are rated at 20, 60 and 100 watts. All channels have separate 4 and 8-ohm outputs as well as 25 and 70 volt taps. Preamp out/power amp in links are also included for each amp channel to facilitate the insertion of signal processing equipment. Adjustable input trim controls let you adjust differing audio source input levels.